5 Best Rising Stocks To Invest In 2014

The considerable increase of China's big bank write offs of bad loans last year has raised suspicions, and MoneyShow's Jim Jubak considers what this means for the entire Chinese financial sector, both in the short- and the long-term.

Yipes. China's five biggest banks increased their write off of bad loans by 127% in 2013 over 2012 levels. The write offs still came to just $9.5 billion in 2013, the just released 2013 financial statements from the bank show. (China's big five banks account for 50% of all bank loans in China.) And the banks remain profitable, even if, at 7% to 15% growth, profits grew more slowly in 2013 than in 2012.

But the rising level of write offs, along with the puzzlingly low ratio of non-performing loans at these banks, has raised suspicions that banks are manipulating write offs to prevent the non-performing loan ratios from rising so quickly that they set off alarms in financial markets. The ratio of non-performing loans—loans that are in trouble, but that aren't yet in so much trouble that they need to be written off—rose to 1% at the end of 2013 from 0.95% a year earlier. (Since China's big banks have aside such large reserves against loan losses, write offs don't hit profitability particularly hard.)

Top 5 Promising Companies To Buy Right Now: Flexpoint Sensor Systems Inc (FLXT)

Flexpoint Sensor Systems, Inc.(Flexpoint), incorporated on June 11, 1992, is a development stage company. The Company is principally engaged in designing, engineering and manufacturing bend sensor technology and products using its patented Bend Sensor technology. Flexpoint manufactures, and has jointly developed, six products that are being sold and supplied to customers. Flexpoint owns nine patents, including patents on specific devices that use the Bend Sensor. The Company works with various Tier 1 (major) automotive suppliers on a variety of products that are in various stages of development and implementation.

Bend Sensor Technology

Flexpoint owns the patent rights to the Company's Bend Sensor technology through Sensitron, Inc. (Sensitron), a wholly owned subsidiary of the Company. The Bend Sensor is a potentiometer bend sensor product consisting of a coated substrate, such as plastic, that changes electrical conductivity as it is bent in a consistent manner. Electronic systems can connect to this sensor and measure in detail the amount of bending or movement that occurs in a predictable manner. A potentiometer functions through the means of metal contacts swiping or rubbing across a resistive element. Flexpoin�� Bend Sensor potentiometer is a single layer with no mechanical assembly that makes it more reliable and smaller, and lighter in weight.

Automotive Products

Flexpoint has developed comfort seat for automobiles utilizing its patented Bend Sensortechnology and is working with Tier 1 suppliers on development of the seat and various seat related controls. Through a joint development arrangement with a Tier1supplier Flexpoint developed and delivered prototypes of the seat. Automobile manufacture has partnered with a Tier 1 supplier and is in the final stages of evaluating Flexpoint�� patented horn switch to replace their existing technology. The automobile manufacturer is also evaluating the use of the Bend Sensor as a switch to open rear! doors of SUV's and as a seat belt reminder (SBR). While working with various Tier 1 automotive suppliers the Company has developed and tested a SBR sensor that alerts the occupant of an automobile to fasten his/her seatbelt.

Flexpoint is working with multiple manufacturers to replace existing devices in the marketplace with a system superior in performance. Four separate and independent automotive suppliers and OEMs tested the Bend Sensor device for use in pedestrian impact detection device. The tests proved that the Bend Sensor device was able to detect impact with a human leg and in the event of an accident and trigger the desired safety response. Flexpoint has also developed a crash sensor, which is a series of sensors mounted in strategic places on the side and door panels of an automobile to detect an impact, as well as the speed, direction and force of the impact. This allows an onboard computer to deploy side air bags where needed. Using the same concept as the Company's automotive seat belt reminder (SBR), this device monitors cinema theater's paying customers and identifies available seats. Flexpoint has supplied a theater management firm with several prototype sensors, which have undergone extensive testing for this application.

As of December 31, 2012, Flexpoint developed and produced 20 prototype medical beds that assist in the management of bed sores. Using the Bend Sensor technology and accompanying electronics the bed is able to determine the position of the person in the bed and how they are moved. The Company has developed a vibration sensor, a rupture disc/bursting disc utilizing the Bend Sensor as the detection/alarm element of a rupture disc device, an infant bed cover using its patented sensors that is used to monitor infants in the prevention of sudden infant death syndrome (SIDS), toys and video gaming devices, and sports applications.

Advisors' Opinion:

• [By CRWE]

  Today, FLXT has shed (-6.25%) down -0.0060 at $.0900 with 19,500 shares in play thus far (ref. google finance Delayed: 11:10AM EDT September 25, 2013).

  Flexpoint Sensor Systems, Inc. previously reported they expect to complete both Phase Two and Phase Three of development of the colonoscope application during the remainder of 2013. The company will receive milestone cash payments for each stage of the development process.

5 Best Rising Stocks To Invest In 2014: Medical Properties Trust Inc (MPW)

Medical Properties Trust, Inc., incorporated on August 27, 2003, is a self-advised real estate investment trust (REIT) focused on investing in and owning net-leased healthcare facilities. The Company conducts substantially all of its business through MPT Operating Partnership, L.P. The Company acquires and develops healthcare facilities and leases the facilities to healthcare operating companies under long-term net leases, which require the tenant to bear the costs associated with the property. The Company also makes mortgage loans to healthcare operators collateralized by their real estate assets. In addition, the Company selectively makes loans to certain of its operators through its taxable REIT subsidiaries. In September 2013, Medical Properties Trust Inc completed the acquisition of the real estate of three acute care hospitals operated by IASIS Healthcare LLC.

As of February 18, 2013, the Company's portfolio consists of 82 properties: 69 facilities (of the 74 facilities that the Company owns) are leased to 23 tenants, five are under development, and the remainder are in the form of mortgage loans to three operators. The Company's owned facilities consist of 27 general acute care hospitals, 24 long-term acute care hospitals, 15 inpatient rehabilitation hospitals, two medical office buildings, and six wellness centers. The non-owned facilities on which the Company has made mortgage loans consist of three general acute care facilities, two long-term acute care hospitals, and three inpatient rehabilitation hospitals. At December 31, 2012, no one property accounted for more than 5% of the Company's total assets.

At December 31, 2012, the Company had leases with 22 hospital operating companies, eight mortgaged loans, six under development, and one property under re-development covering 82 facilities. Ernest leased 12 of these facilities pursuant to a master lease agreement. The master lease agreement has a 20-year term with three five-year extension options and provides for ! an initial rental rate of 9%, with consumer price-indexed increases, limited to a 2% floor and 5% ceiling annually thereafter. At December 31, 2012, these facilities had an average remaining lease term of approximately 19 years. In addition to the master lease, the Company holds a mortgage loan on four facilities owned by affiliates of Ernest.

Affiliates of Prime Healthcare Services, Inc. (Prime) leased 11 facilities pursuant to master lease agreements. The master leases are for 10 years commencing July 3, 2012 and contain two renewal options of five years each. The initial lease rate is generally consistent with the blended average rate of the prior lease agreements. However, the annual escalators, which in the prior leases were limited, have been increased to reflect 100% of CPI increases, along with a 2% minimum floor. The master leases include repurchase options substantially similar to those in the prior leases, including provisions establishing minimum repurchase prices equal to the Company's total investment. In addition to leases, the Company holds mortgage loans on three facilities owned by affiliates of Prime.

Advisors' Opinion:

• [By Eric Volkman]

  It was an impressive quarter for Medical Properties Trust (NYSE: MPW  ) . In its Q1 report, revenues amounted to $58 million, up 42% from the $41 million in the same period the previous year. Attributable net profit advanced much more strongly, growing 148% to $26 million ($0.18 per diluted share) from Q1 2012's figure of $11 million ($0.08). Funds from operations -- a key metric for real estate investment trusts -- came in at $35 million ($0.25 per diluted share) on a normalized basis, compared with $22 million ($0.18) in the year-ago quarter.

• [By Brad Thomas]

  A Bank of America (BOA) downgrade sends Medical Properties Trust (MPW) tumbling. The bank cut the shares to Underperform from Neutral citing the REIT's YTD outperformance relative to the sector overall (it has outpaced healthcare REITs two to one). Put simply, funds from operations "multiple expansion has exceeded fundamental trends." SA contributor Brad Thomas claims MPW is an example of mispriced risk.

• [By Rich Duprey]

  Real estate investment trust�Medical Properties Trust� (NYSE: MPW  ) �announced yesterday�its second-quarter dividend of $0.20 per share, the same rate it's paid since 2008.

5 Best Rising Stocks To Invest In 2014: Forward Industries Inc.(FORD)

Forward Industries, Inc., together with its subsidiaries, designs, markets, and distributes carry and protective solutions. The company offers soft-sided carrying cases, bags, clips, hand straps, protective plates, and skins, as well as other accessories for hand held electronic devices, including medical monitoring and diagnostic kits, bar code scanners, GPS and location devices, and cellular telephones. It also designs, markets, and distributes carry and protective solutions for other consumer products, such as laptop computers, MP3 players, firearms, sporting, recreational, and aeronautical products. The company provides its products for used by consumers in protecting, and carrying or transporting portable electronic and other products. Forward Industries, Inc. sells its products to original equipment manufacturers and contract manufacturers in the Asia Pacific, the Americas, and Europe. Forward Industries was founded in 1954 and is based in Santa Monica, California. Advisors' Opinion:

• [By Chris Woodyard]

  For the moment, Cotter says Ford isn't releasing any other pricing information on the next Mustang ��just the base price. To sell off current stocks of Mustang and make way for the new one, he says there are incentives of about $1,000 on the sporty car.

  The redesigned 2015 Ford Mustang is to hit dealerships this fall, a few months after the pony car's 50th birthday.  (Photo: Ford) Fullscreen Ford decided on evolutionary styling on the 2015 Mustang to retain loyalists, hoping the look also is adventuresome enough to draw new buyers.  (Photo: Ford) Fullscreen Dramatic suspension and chassis changes required a wider back end on the 2015 Mustang. Rear wheels are nearly 3 inches further apart and rear fenders are about 1.5 in. wider than on current car.  (Photo: Ford) Fullscreen The 2015 Ford Mustang's headlights are more powerful and the fog lights are relocated.   (Photo: Ford) Fullscreen The design of the 2015 Ford Mustang was done at the huge Mustang studio in Dearborn, Mich., near the automaker's headquarters. That's counter to the trend of designing in California or overseas.  (Photo: Ford) Fullscreen The middle roof pillar -- called the B pillar -- is hidden behind the door glass for a smoother silhouette. The B pillar normally is exposed and sits between the front and rear window glass.   (Photo: Ford) Fullscreen Roof line of the 2015 Mustang is 1.5 in. lower than on its predecessor, to help the car slip through the air easier.  (Photo: Ford) Fullscreen Engineers gave all versions of the 2015 Mustang an independent rear suspension. That's a first, intended to improve ride, handling and steering. It's costlier than the solid rear axle the car has used since l
• [By Michael Antonoff]

  Both cars became associated with my deepest regrets. The first because I traded it in for $200 toward a new powder-blue, feel-the-road-on-your-fanny, no-pep Pinto when the Mustang needed $300 of transmission work. My Mustang soon would be known as a Classic, easily worth $10,000. The convertible turned out to be a Lemon Classic that left me repeatedly stranded from Route 101 to the Santa Cruz Mountains. (I should have known something was afoot when a day after driving the car off the lot, black smoke began pouring out of the tailpipe.)

  The original 1965 Ford Mustang convertible in Wimbledon White -- the early version known to many as the 1964 1/2. Mustang went on sale on April 17, 1964 and sold more than 418,000 in the first 12 months.  (Photo: Ford)View Fullscreen The sixth-generation, redesigned 2015 Mustang.  (Photo: Ford)View Fullscreen The 1963 Ford Special Falcon: A prototype of the upcoming Mustang on the Falcon chassis before the name was final. At this time it was referred to as the ��pecial Falcon��and had Cougar badges, one of names under consideration.   (Photo: Ford)View Fullscreen Company head Henry Ford II with the 1964 1/2 Mustang Ford at the car's unveiling at the New York World's Fair in Flushing Meadows, N.Y. on April 17, 1964.  (Photo: Ford)View Fullscreen The 1965 Ford Mustang hardtop on display in the Ford Pavilion at the 1964 New York World's Fair where the car was introduced April 17, 1964.  (Photo: Ford)View Fullscreen 1964 Ford Mustang ad from the New York World's Fair.  (Photo: Ford)View Fullscreen Ad photo for the 1965-model Mustang: By June 1964, Mustang has three body styles -- fastback, hardtop and convertible -- with four engine options.  (Photo: Ford)View Fullscreen A 2010 photo of Gail Wise, the first known retail buyer of a Mustang, with her 1965 convertible bought i
• [By James R. Healey and Fred Meier] Ford Motor's F-150 continued a sales boom in 2013. Ford's F-series lineup was the best-selling vehicle of any kind in the U.S. for 32nd consecutive year. An F-150 Tremor sport truck model is shown.(Photo: Ford)

5 Best Rising Stocks To Invest In 2014: PIMCO 1-5 Year US TIPS Index Exchange-Traded Fund (STPZ)

PIMCO 1-5 Year US TIPS Index ETF, formerly Pimco 1-5 Year U.S. TIPS Index Fund, is an exchange traded fund (ETF) designed to capture the returns of the shorter maturity subset of the Treasury Inflation-Protected Securities (TIPS) market by tracking The BofA Merrill Lynch 1-5 Year US Inflation-Linked Treasury Index. The BofA Merrill Lynch 1-5 Year US Inflation-Linked Treasury Index is an unmanaged index comprised of the United States Treasury Inflation Protected Securities with at least $1 billion in outstanding face value and a remaining term to final maturity of at least one year and less than five years. Advisors' Opinion:

• [By Benjamin Shepherd]

  While there are several exchange-traded funds (ETFs) devoted to TIPS, my favorite is PIMCO 1-5 Year US TIPS Index (NYSE: STPZ).

  This ETF has one of the lowest durations of any of the TIPS funds at 2.7 years, so it won’t take much of a ding based on shifting interest rates.